Technical characteristics Mitsubishi Electric PQRY-P300YHM-A:
Main functions:
| Cooling | yes |
| Heating | yes |
Key Features:
| Voltage, V / Hz / F | 380-415/50/3 |
| Color | white |
| Power consumption, kW | 8.15 |
| Maximum cooling performance | 33.5 |
| Energy efficiency in the cooling mode (EER) | 4.50 |
| Maximum performance heating | 37.5 |
| Energy efficiency in heating mode (COP) | 4.60 |
| Outdoor unit size, mm | 1160h880h550 |
| Noise level outdoor unit dB | 50 |
| Type of Freon (refrigerant) | R410A |
Additional Information:
| Range of outdoor temperature for heating | from -5 ° C to +45 ° C |
| Range of outdoor temperature in cooling | from -5 ° C to +45 ° C |
| Inverter control | yes |
| Brand Compressor | Mitsubishi Electric |
| Production | Japan |
| Assembly | Thailand |
| Warranty | 3 years |
| Synonymous with | PQRY-P300YHM-A |
Mitsubishi Electric PQRY-P300YHM-A - outdoor unit with a water circuit
For model PQRY-P300YHM-A is characterized by:
- maximum efficiency by two heat recovery units (mandatory aircraft systems (WCB) - controller)
- intermediate loop carrier (additional degree of freedom in the management of the system parameters, the possibility of year-round cooling of the object)
- location inside buildings
- small size
- Full independence users
- lack of direct heat exchange between the refrigerant circuit and outdoor air
- removal of restrictions on the distance and elevation
- possibility of heat recovery for heating buildings from systems operating in the cooling mode
- opportunity to optimize the temperature and water flow for maximum efficiency of the refrigeration cycle
- location in the vicinity of the inner blocks (minimizing performance degradation system associated with a long line of refrigerant)
- simultaneous operation of indoor units in cooling and heating
Index installed capacity of indoor units: 50-150% of the index of outdoor unit capacity
Number of indoor units: 1-30
Operating current:
- Cooling - 12.5 A
- heating - 13.7 A
Nominal water flow - 5,76 m3 / h
Flow range 4,5-7,2 m3 / h
Pressure Drop - 17 kPa
Maximum water pressure - 2.0 MPa
No comments:
Post a Comment