Conditioner Panasonic CS/CU-HE12NKD

Specifications Panasonic CS/CU-HE12NKD:

Main functions:

Cooling	yes
Heating	yes
Filtering	yes
Ionization	there is
Dehumidification	yes
Ventilation	yes

Key Features:

Room size, sq m	35
Air flow, m3 / h	768
Maximum cooling performance	3.50
Energy efficiency in the cooling mode (EER)	3.95 (Class A)
Maximum performance heating	4.40
Energy efficiency in heating mode (COP)	4.11 (Class A)
Indoor unit size, mm	290 x 870 x 204
Outdoor unit size, mm	540 x 780 x 289
Indoor noise level, dB - min / max	20/42
Noise level outdoor unit dB	50
Type of Freon (refrigerant)	R410A

Additional Information:

Range of outdoor temperature for heating	from -15 ° C to +24 ° C
Range of outdoor temperature in cooling	from -15 ° C to +43 ° C
Inverter control	yes
Adaptation to cold temperatures	yes
Automatic restart	yes
Timer on-off	yes
Remote control	yes
Brand Compressor	Panasonic
Production	Japan
Assembly	Panasonic factory in Malaysia
Warranty	3 years on the air conditioner, and 5 years on the compressor
Synonymous with	Panasonic CS-HE12MKD/CU-HE12MKD

Documentation for Panasonic CS/CU-HE12NKD

Operating instructions

Download PDF

Inverter technology for the rapid achievement of comfort

In addition to modulating the compressor and minimum energy consumption, inverter air conditioner Panasonic CS/CU-HE12NKD able to operate at a higher power after starting to cool the room is 1.5 times faster, or heat it up to 4 times faster than conventional models.

Space heating in heat pump mode

Air conditioner with heat pump can not only effectively cool, but quickly warm the room. In the summer heat in the room is absorbed and removed the outside and in the winter - the opposite heat is extracted from the outside air and is used to heat the inside. Heat pump air conditioner uses a refrigeration cycle to transfer heat to the outside or into the room.
Heat pumps FLAGSHIP from Panasonic is an essential tool for heating in the winter, even at temperatures down to -20 º C.
The coefficient of efficiency in Air Conditioner with heat pump CS-HE09NKD at work on heating is 4.82. This means that it uses minimal power 0,18-0,52-1,36 kW and converts it into thermal power up to 3.4 kW of heating.
Therefore, operating costs up to 30% less than the cost of expenses for gas and 70% less than the cost of traditional electric heating.

ECONAVI - recognition of human activity

The ability of the sensor to determine the activity of movement of people in the room, allows you to adjust the direction and power of the air flow. This reduces energy costs and minimizes the use of power conditioner.

Work Smart ECO-Sensor:
Air flow control, depending on the location of people
Regulation of cooling capacity, depending on the activity of the people in the room

Air purification system

Panasonic CS/CU-HE12NKD series models feature a new flagship air purification system nanoe-G.
It effectively removes bacteria, viruses and mold spores in the air and on surfaces, thus creating a healthy living environment.

IN THE AIR
Nanoe-G system of abilities to eliminate up to 99% of the flying of airborne bacteria, viruses and mold spores.

SURFACE
Nanoe-G system can neutralize up to 99% of surface microorganisms, such as bacteria and viruses, and stop mold growth on surfaces and fabrics.

Soft Dry air-cooled

Cooling with mild drainage (MildDry Cooling) maintains a higher level of relative humidity (10%) compared to conventional cooling.
This helps to reduce the dryness of the skin and dryness in the throat.

Automatic selection of operating modes: air conditioner or heat pump

Sensors periodically measure the temperature outside and inside the building and on the basis of these measurements, the microprocessor selects the proper operation of the system.