5.24.2013

Underceiling conditioner Daikin FHQ60 / RXS60

Daikin FHQ60 / RXS60

Specifications Daikin FHQ60 / RXS60:

Main functions:

Coolingyes
Heatingyes
Filteringyes
Dehumidificationyes
Ventilationyes

Key Features:

Voltage, V / Hz / F220/50/1
Colorwhite
Room size, sq m60
Air flow, m3 / h1020
Power consumption, kW2.75
Maximum cooling performance5.7 (1.7-6.0)
Energy efficiency in the cooling mode (EER)2,65 (D)
Maximum performance heating7.2 (1.7-8.0)
Energy efficiency in heating mode (COP)2,89 (D)
Indoor unit size, mm195h1160h680
Outdoor unit size, mm735x825x300
Indoor noise level, dB - min / max33/39
Noise level outdoor unit dB46/49
Type of Freon (refrigerant)R410A

Additional Information:

Range of outdoor temperature for heatingfrom -15 ° C to +18 ° C
Range of outdoor temperature in coolingfrom -10 ° C to +46 ° C
Maximum trunk length, m30
Inverter controlyes
Automatic restartyes
Camodiagnostikayes
Timer on-offyes
Remote controlyes
Brand CompressorDaikin
ProductionJapan
AssemblyBelgium
Warranty3 years

Air Conditioner Daikin FHQ60 / RXS60 underceiling single-type has a number of advantages:

  • efficient air distribution both vertically and horizontally;
  • advanced airflow pattern thanks to Coanda effect - up to 100 degrees;
  • mode of air distribution for ceiling heights up to 3.8m without loss of intensity;
  • Timer mode (72-Hour Timer) ^ time programming on and switch-off 72 hours in advance;
  • low noise fan (Silent Stream Fan) - noise level - 33 dB;
  • warm start - function which prevents entry of cold air into the room in the first moments of the air conditioner when heated;
  • self-diagnosis function (Self Diagnosis Function) is designed to quickly locate possible faults conditioner, as well as to reduce the time and cost of their removal;;
  • Auto Restart - Auto-restart;
  • mode of air drying (Programme Dry Function) supports the relative humidity in a room of 35 to 60% without a change in temperature;
  • mode while you are saving electricity;
  • automatic defrosting frost protection for outdoor heat exchanger fouling frost, thus eliminating lost productivity conditioning and energy saving;
  • protection from extreme temperatures prevents frost on the heat exchanger of the indoor unit and eliminates the unacceptable growth of the refrigerant pressure in the pipeline;
  • can work in the multi system;
  • can be installed in new and existing buildings;
  • easily mounted in corners and narrow spaces, as requires only 30 mm of reach from the side.

No comments:

Post a Comment