Specifications Panasonic S-56MA1E5:
Main functions:
| Cooling | yes |
| Heating | yes |
| Filtering | yes |
| Dehumidification | yes |
| Ventilation | yes |
Key Features:
| Voltage, V / Hz / F | 220-240/50/1 |
| Air flow, m3 / h | 900 |
| Power consumption, kW | 0.135 |
| Maximum cooling performance | 5.60 |
| Maximum performance heating | 6.40 |
| Indoor unit size, mm | 250? 780 (+100)? 650 |
| Indoor noise level, dB - min / max | 35/42 |
| Type of Freon (refrigerant) | R-410A |
Additional Information:
| Inverter control | yes |
| Automatic restart | yes |
| Timer on-off | yes |
| Remote control | yes |
| Brand Compressor | Panasonic |
| Production | Japan |
| Assembly | Malaysia |
| Warranty | 5 years |
Low-profile model channel type with an average static pressure series FS Multi Inverter is Panasonic S-56MA1E5
The main advantages of the model S-56MA1E5 include:
- removable air-filter (nominated in three directions)
- indication of pollution filter
- 24-hour on / off timer with the installation of real-time
- the ability to control the fan (only with a wired remote control)
- ability to set the static pressure
- the ability to assign addresses internal and external units
- ability to work in emergency mode (only with infrared remote control)
- Test mode of the indoor unit
- choice of change point t ° air (only with a wired remote)
- display of the timer
- light weight and small size (convenient transportation and installation)
- Group control with one remote
- Digital I / O (only CZ-TA31P)
- Weekly Timer (only with a wired remote control)
- thin and narrow housing (accommodation in a confined space)
- mode of the outdoor unit with reduced noise
- ability to self-test diagnostic registration (only with a wired remote control)
- can automatically reset the address for group control (only with a wired remote control)
- different ways of placing the air intake and drainage holes (for flexible and easy installation of the system)
Capacity, - 3.2 l / h
Diameter refrigerant pipes attached: liquid - 6.35 mm gas - 12.70 mm
External static pressure is set by default by the manufacturer at 49 Pa.
No comments:
Post a Comment